Related Topics
The All-Pass Filter provides phase-shift control as a function of frequency.
The controls listed below are divided into sections to match the Control Panel sections.
Once you establish the initial settings for a component, you can save those settings, along with all the other component's settings, in a Snapshot.
|
Control |
Function |
Default / Range |
|---|---|---|
|
Response Panel |
The Response panel provides vertical and horizontal cross-hairs with a dynamic frequency and dB read-out. Place the mouse courser over the graph to activate the cross-hairs. When the Phase control is activated, the horizontal cross-hair line to the left of center represents the normal curve, the right side represents the phase curve. The readout is only for the normal curve. |
X-Axis = Freq, 20 Hz to 20 kHz Y-Axis Left = dB, -24 dB to 24 dB Y Axis Right = Phase, -180° to -180° |
|
Phase |
Turns the Phase curve on and off. |
On/Off |
|
Bypass |
Bypasses the filter. |
Off/On |
|
Invert |
Inverts the output signal. |
Normal/Inverted |
|
Mute |
Mutes the output signal. |
Off/On |
|
Frequency (Hz) |
Sets the center frequency for the phase shift. |
Default = 1000 Range = 20 to 20000 |
|
Q-factor |
The Q-factor determines the sharpness of the high- and low-pass attenuation slopes and the range of frequencies to pass. |
Default = 1.00 Range = 0.1 to 10 |
|
Property |
Function |
Choices |
|---|---|---|
|
Filter Order |
Selects First or Second Order filter. Q is added to the Control Panel for Second Order. |
First Order Second Order |
|
Property |
Function |
Choices |
|---|---|---|
|
Type |
Sets the type of input and output channels |
Mono Stereo Multi-Channel |
|
Count |
For Multi-Channel, sets the number of channels. |
2 to 256 |
|
Property |
Function |
Choices |
|---|---|---|
|
Enabled |
Determines if the Response Panel is visible in the Control Panel |
Yes / No |
|
Size |
Determines the size of the Response Panel. |
Small Medium Large |
|
Pin Name |
Value |
String |
Position |
Pins Available |
|---|---|---|---|---|
|
Bypass |
0 1 |
active bypass |
0 1 |
Input / Output |
|
Frequency |
10.0 to 20,000 |
10 Hz to 20 kHz |
0.000 to 1.00 |
Output |
|
Invert |
0 1 |
normal invert |
0 1 |
Input / Output |
|
Mute |
0 1 |
unmute mute |
0 1 |
Input / Output
|
|
Q |
.100 to 10 |
.100 to 10.0 |
0.000 to 1.00 |
Input / Output |
© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
http://patents.qsc.com.
